Welcome Guest | Login | Register

Efficiency Center

Electric Efficiency

Electricity is a huge regular expenditure of any modern age firm but the best of electricity management is that neither it requires extreme expertise unlike thermal efficiency nor it requires huge maintenance cost. If initial investments are done after proper consideration of all aspects then with a small regular budget, systems could be maintained.

Electricity costs for an enterprise consist of the following:

  • Energy costs in the true sense (i.e. the cost of the kWh consumed).
  • Costs of power demand (i.e. the cost of the peak electrical power requirement).

Energy costs can be reduced primarily by reducing electricity consumption (i.e. by increasing energy efficiency), while power demand costs can be reduced by other means—by reducing peaks of power consumption. Reducing power peaks can lead to reduced consumption of electrical energy, but this is not an inevitable consequence. Both increasing energy efficiency and reducing maximum electrical load must be preceded by analysis of the processes that consume electrical energy. Very precise knowledge of the processes is necessary to define measures to increase energy efficiency in an effective and economical way, and to be able cut off consumers during (short) periods of time to reduce peak load.

For ease of understanding and phase wise application, section has been exhaustively divided into many sub sections, as under:

1. Electricity management systems
2. Electric motors
3. Transformers
4. Pump systems
5. Fan systems
6. Compressed air systems
7. Lighting system basics

 

Copyright 2026 South Gujarat Textile Processors Association. All rights reserved. | Developed by 3Fusion