A boiler is a vessel that uses heat liberated by combustion of a fuel to produce hot water or steam. Boilers are pressure vessels, designed to withstand the steam pressures needed in processes. They can be very dangerous if not correctly operated and maintained. An economizer, air heater, or super heater fitted to a boiler will enable most of the heat liberated from the fuel to be used. Super heaters increase the temperature of steam and are necessary to render the steam suitable for use in steam turbines or steam engines.
Types of boilers
Boilers can be categorized broadly as follows:
a.Water tube
b.Smoke tube
c.Fluidized bed boiler
Water tube boiler
Water tube boilers are designed for higher pressures and steam generation rates, normally above 4 tons per hour. They are generally characterized by the following features:
a.Mechanical stokers giving better stoking efficiency for solid fuels.
b.Forced, induced and balanced draught systems helping to improve combustion efficiency.
c.Lower tolerance for water quality making water treatment plant necessary.
d.Higher thermal efficiency levels are possible than for Lancashire boilers.
Smoke tube boiler
Smoke tube boiler can be of 2 types i.e. packaging type or Lancashire type. Package boilers are shell type boilers with smoke tube design. They achieve high heat transfer rates by both radiation and convection where as Lancashire boilers have following characteristics:
a.Large thermal storage capacity permitting smooth handling of load fluctuations.
b.Able to tolerate poor feed water quality.
c.High thermal inertia (due to thermal storage) resulting in sluggish start up response.
d.Poor convective heat transfer contributing to low thermal efficiency
Fluidized bed boiler
Developments in combustion technology for solid fuels such as coal, rice husks, etc. have heralded the introduction of fluidized bed combustion (FBC) boilers, which can burn a wide variety of fuels including low-grade coals effectively. A typical FBC system consists of a cylindrical vessel with air ducts connected to the bottom of the vessel. The fire bed—consisting of sand particles, coal ash or alumina—rests on a distribution plate near the bottom and is ‘fluidized’ by the passage of combustion air upwards through it. A start-up system, using gas or oil burners, heats the bed to a temperature at which coal can be burned. Coal is then fed (pneumatically) into the bed where it is distributed and burns rapidly. The heat liberated by combustion is transferred to water tubes, some of which may be immersed in the bed, to generate hot water or steam. Ash is removed continuously to maintain a constant bed depth. Thermal efficiencies in excess of 80 per cent can be expected of FBC boilers.
For more detailed information on type of Boilers, following document can be referred:-
Boiler