Like boilers, thermic fluid heaters (TFH) or fired heaters (FH) are units designed to transfer heat from combustion to a 'working' or 'thermic' fluid. However, a TFH or FH is not necessarily a pressure vessel and the working fluid—typically a petroleum-based oil—does not change from its fluid state.
The units operate in a closed loop with the thermic fluid picking up heat energy at one end of the loop and then transferring it to process equipment by indirect transfer via heat exchangers.
TFHs and FHs are used for high-temperature heat transfer applications (270–300 °C). They have advantages over boilers for applications requiring such temperatures: they avoid the need for high-pressure steam and the related complexities such as water treatment, pressure vessel regulations, etc.
Inputs to TFH and FH include:
a.Heat from fuel
b.Combustion air
c.Motive power to auxiliaries (e.g. thermic fluid circulating pump, draught fans, fuel-handling equipment, etc.)
The useful heat output is the heat transferred by the thermic fluid. Other outputs include:
a.Flue gases
b.Solid waste from fuel combustion
c.Unburned fuel in flue gases
In recent times, TFHs have found wide application in indirect process heating. Employing petroleum-based fluids as the heat transfer medium, they provide constantly maintainable temperatures for the user equipment. The combustion system comprises a fixed grate with mechanical draught arrangements. Modern oil fired TFHs are of double-oil, three-pass construction and are fitted with modulated pressure jet systems. The heat carrying thermic fluid is heated (in the heater), circulated through the user equipment where it transfers heat for the process via a heat exchanger, and then returned to the heater. At the user end, the flow of thermic fluid is controlled by a pneumatically operated valve, controlled by the operating temperature. The heater operates on low or high fire, depending on the temperature of the returning oil which varies with system load.
The advantages of these heaters are:
a.Closed cycle operation with minimum losses compared to steam boilers.
b.Non-pressurized system operation, even for temperatures of around 250 °C, against 40 kg/cm2 of steam pressure required in similar steam systems.
c.Automatic control settings, offering operational flexibility.
d.Good thermal efficiency, as losses due to blow down, condensate drain and flash steam do not exist in TFH systems.
The overall economics of a TFH depend on the specific application and reference basis. Coal fired TFHs with a thermal efficiency range of 55–65 per cent compare favorably with most boilers. Incorporation of heat recovery devices in the flue gas path further enhances thermal efficiency levels.
TFH efficiency
The efficiency of a heater is defined as the ratio of heat output to heat input.
Mathematically, this can be expressed as follows:
